Supa Peg are delighted to offer this Aussie made stainless steelbrackets, made to suit the Rhino platform rack. We have developed thesebracketsusing 5mm stainless steel, with stainless nuts and bolts.. so if you have the rhino rack platform, you need to purchase thesebrackets.

DOES NOT SUIT SHIELD 6

Stainless Steel Awning Bracket for Rhino Rack Pioneer Platform

What you get?

2 x Extra Long Stainless Steel Brackets 325mm x 70mm high (40mm wide x 5mm thick)
4 x Channel Nuts
4 x 20mm x M8 Hex head BoltsStainless
4 x 16mm x M8 Hex Head Bolts Stainless
4 x Flat Washers M8Stainless
4 x Spring Washers M8Stainless
4 x M8 Nyloc NutsStainless
1 x Grease Pack (this needs to be applied when doing up any stainless bolts & nuts to prevent them seizing together)

AMBRP-STD -> Suits Supa Peg Australian awnings with a 33mm Bolt Spacing on awning

WE DO OUR BEST TO GET ALL THE TYPES OF RHINO RACKS COVERED. IN SOME CASE THERE MIGHT BE SOME HOLES THAT WILL NOT LINE UP… IN THAT CASE YOU NEED TO BE PREPARED TO DRILL YOUR OWN HOLES.

Check the hole spacing as the per the images if you are unsure.